PMatic-10/16 Industrial Slurry System for up to 10 to 16 Spindles. Maximum filling volumes PMatic-10 30 l Pmatic-16 polish: 75 l cooling water: 120 l Minimum flow rate 25 l per minute Spindle capacity: Pmatic-10 10(corresponds to 5 Toro-X machines) at 10°C polish temperatur, 6°C when connecting 8 spindels or 2 i-FLEX / Auto-FLEX Pmatic-16 16(corresponds to 8 Toro-X machines or 2 Toro-FLEX / Duo-FLEX or 3 i-FLEX / Auto-FLEX) Voltage 400 V / 50 Hz, 3-phase 460 V / 60 Hz, 3-phase Dimensions (W x D x H) PMatic-16: Polishing unit: 870 x 755 x 1510 mm Cooling unit: 770 x 755 x 1550 mm Both units side by side: 1640 x 755 x 1550 mm Pmatic-10 870 mm x 755 mm x 1640 mm Weight Pmatic-16 255 kg (polishing unit) Pmatic-16 270 kg (cooling unit) Pmatic-10 275 kg Industrial filtering and cooling system for polish - especially developed for highest demands of RX-labs - consisting of: - Integrated chilling unit - Stainless steel polish container with filter system. Suitable for up to 10/16 polishing spindles PMatic-10 suits 2 i-FLEX / 2 Auto-FLEX PMatic-16 suits 3 i-FLEX / 3 Auto-FLEX or 2 Duo-FLEX / 2 Toro-FLEX Temperature control with programmable temperature limits Multi-use 200 Micron filter for polish (other filters available) Stainless steel polish container and cooling coil Check Baumé easily with integrated polish sampling valve PMatic-16: Separate cooling and slurry units (mounted on rollers) for remote installation For all ophthalmic lens materials: Polycarbonate, organics and mineral glass

Product Info Pmatic-10/16 123.64KB